Replacing The Finger Pricker With A Blanking Plate - Accu-Chek Compact Plus Reference Manual

10.1 Replacing the finger pricker with a blanking plate

Undock the finger pricker from the meter as follows.
Push the slide button in the direction indicated by the arrow (1) and
hold it there.
Slide the finger pricker out in the direction indicated by the arrow
(2).
152
Blood glucose testing in a multi-patient setting
Instead of the finger pricker you can use a blanking plate which is avail-
able from the Accu-Chek Customer Careline free on 0800 701000 (UK)
or 1800 709600 (Ireland).
Hold the meter so it is horizontal, with the recess for docking the fin-
ger pricker pointing upwards.
Slide the blanking plate over the recess from the left along the
meter in the direction indicated by the arrow.
The guides along the inside of the recess must engage with the
grooves along the blanking plate. The blanking plate is properly
attached when it locks into place with an audible CLICK.
Blood glucose testing in a multi-patient setting
10
153