Maintenance - GE Compact Electric Free-Standing Ranges Owner's Manual

Maintenance

WARNING
CAUTION
Oven Light Replacement (on some models)
To remove the cover:
1. Hold a hand under the cover so it doesn't fall when
released. With fingers of the same hand, firmly push
back the wire cover holder. Lift off the cover.
Do not remove any screws to remove the cover.
2. Replace bulb with a 40-watt appliance bulb.
To replace the cover:
1. Place it into groove of the light receptacle. Pull wire
forward to the center of the cover until it snaps into
place.
2. Connect electrical power to the range.
26
SHOCK OR BURN HAZARD:
power to the range at the main fuse or circuit breaker panel. Failure to do so may result
in electric shock or burn.
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot
glass with bare hands or a damp cloth can cause burns.
Wire cover holder
49-88058