Cook And Hold - GE Compact Electric Free-Standing Ranges Owner's Manual

Special Features
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound
followed by one beep every 6 seconds until the Clear/
Off pad is touched. This continuous 6 second beep may
be canceled.
To cancel the 6 second beep:
1. Touch the Bake and Broil Hi/Lo pads at the same
time for 3 seconds until the display shows "SF".
12 Hour, 24 Hour or Clock Black-Out
If you would prefer to have a 24 hour military time clock
or black-out the clock display, follow the steps below.
1. Touch the Bake and Broil Hi/Lo pads at the same
time for 3 seconds until the display shows "SF".
2. Touch the Timer/Clock pad once. The display will
show "12 hr". If this is the choice you want, touch
the Start pad. Touch the Timer/Clock pad again
to change to the 24 hour military time clock. The
display will show "24 hr". If this is the choice you

Cook and Hold

or Roasting is finished.
NOTE: This feature can only be programed to work
timed baking and roasting features section.) After Timed
programmed Cook and Hold will automatically start.
Roasting, follow the steps below:
Changing the Speed of the + or - Pads
As you use the + or - pads when setting a time or
temperature, you may notice the display changes slowly.
This special feature allows you to change the speed. To
set the speed you prefer, follow the steps below:
1. Touch the Bake and Broil Hi/Lo pads at the same
time for 3 seconds until the display shows "SF".
2. Touch the + pad. The display will show you a set
14
2. Touch the Broil Hi/Lo pad.
(continuous beep). Touch the
Broil Hi/Lo pad again. The
cancels the one beep every 6
seconds.)
3. Touch the Start pad.
want touch the Start pad. Touch
the Timer/Clock pad again to
black-out the clock display. The
display will show "Off". If this is
the choice you want, touch the
Start pad. NOTE: If the clock is
in the black-out mode you will not
be able to use the Delay Start
function.
1. Touch the Bake and Broil Hi/
Lo pads at the same time for 3
seconds until the display shows
"SF".
2. Touch the Cooking Time pad.
The display will show "Hld Off".
Touch the Cooking Time pad
again to activate the feature. The
display will read "Hld On".
3. Touch the Start pad to activate
the cook and hold feature and leave the control set
in this special features mode.
3. Touch the + pad to increase the
the - pad to decrease the speed
down to the number 1.
4. Touch Start to activate the
setting and leave the control set
in this special features mode.
49-88058