Routine Inspection Checklist - BRP Evinrude E-TEC Operator's Manual

ROUTINE INSPECTION CHECKLIST

Pre-Launch Checks (Each Use)

Check fuel level.

Check oil level.

Check function of steering, throttle, shift, and emergency stop circuit and lanyard.

Check condition of propeller.

Confirm operation of engine monitor system self-test and warning horn.

Confirm the cooling system is operational (water intake screens and water pump indicator).

Confirm this Operator's Guide is onboard and readily accessible.
Periodic Checks

Check condition of anti-corrosion anodes (annually or every 100 hours).

Check for debris on propeller shaft (requires propeller removal).

Clean and wax upper and lower engine covers (annually or every 100 hours).

In salt water applications, check lubrication points and corrosion protection. Use Evinrude anti-corrosion spray or
Evinrude "6 in 1" multi-purpose lubricant (annually or 100 hours).
 ROUTINE INSPECTION CHECKLIST
31