Table of Contents
Advertisement
PORTABLE AIR BLOWER
INFINITELY VARIABLE SPEED
93231
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
©
®
Copyright
2005 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 93231
Summary of Contents for Chicago Electric 93231
- Page 1 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353.
-
Page 2: Product Specifications
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. SKU 93231 Page 2... -
Page 3: Electrical Safety
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. SKU 93231 Page 3... - Page 4 Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. SKU 93231 Page 4...
-
Page 5: Specific Safety Rules
SPECIFIC SAFETY RULES Maintain labels and nameplates on the blower. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. -
Page 6: Grounded Tools: Tools With Three Prong Plugs
The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See Figure A.) SKU 93231 Page 6... -
Page 7: Double Insulated Tools: Tools With Two Prong Plugs
Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. (See Figure B.) Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) FIGURE B SKU 93231 Page 7... -
Page 8: Extension Cords
Extension Cord Length Full Load) 25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 0 - 2.0 2.1 - 3.4 3.5 - 5.0 6.1 - 7.0 7.1 - 12.0 12.1 - 16.0 16.1 - 20.0 SKU 93231 Page 8... - Page 9 UNPACKING When unpacking, check to make sure that your item is in good condition. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
- Page 10 (15). If any devices plugged onto the Sockets draw more than the sum total of 13 amps, the circuit breaker will trip, cutting off electricity to the Blower and the Sockets. The variable speed Power Switch (23) SKU 93231 Page 10...
-
Page 11: Inspection, Maintenance, And Cleaning
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 93231 Page 11... -
Page 12: Assembly Diagram
NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 93231 Page 12...