Behringer EURODESK SX3282 Quick Manual page 6

EURODESK
SX3282
INPUT CHANNELS
Mic input
Type XLR connector, electronically
balanced, discrete input circuit
Phantom power +48 V DC
MIC E.I.N. (22 HZ - 22 KHZ)
@ 150 ohms source –129.0 dBu
Input shortened –132.0 dBu
Distortion (THD + Noise) 0.007 % @ +4 dBu, 1 kHz,
bandwidth 80 kHz
Gain range +10 dB to +60 dB
Max. input level +12 dBu
Line input
Type ¼" TRS jack,
electronically balanced
Impedance 20 kΩ balanced, 10 kΩ unbalanced
Gain range Mono channels: –10 dB to +40 dB
Stereo channels: –20 dB to +20 dB
Max. input level +22 dBu
Channel fader range +10 dB to off
Aux send gain range +15 dB to off
EQ MONO CHANNELS
Hi shelving 12 kHz, ±15 dB
Mid sweep 100 Hz to 8 kHz, ±15 dB,
Q fi xed at 2 oct.
Lo shelving 80 Hz, ±15 dB
Lo out (HPF) 75 Hz, 18 dB/oct.
For service, support or more information contact the BEHRINGER location nearest you:
Europe Tel.: +49 2154 9206 4149
Fax: +49 2154 9206 4199
USA/Canada Tel.: +1 425 672 0816
Fax: +1 425 673 7647
©2011 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which
may be suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00381
EQ STEREO CHANNELS
Hi shelving 12 kHz, ±15 dB
Hi Mid peaking 3 kHz, ±15 dB, Q fi xed at 2 oct.
Lo Mid peaking 500 Hz, ±15 dB, Q fi xed at 2 oct.
Lo out (HPF) 75 Hz, 18 dB/oct.
CHANNEL INSERTS
Type ¼" TRS jack, unbalanced
Max. in/out +22 dBu
Channel to channel crosstalk –95 dB @ 1 kHz
SUBGROUP SECTION
Noise
Bus noise, fader @ 0 dB –105.0 dBr
All input channels assigned & set
@ 0 dB gain, channels muted
–92.0 dBr
All input channels assigned & set
@ 0 dB gain –87.0 dBr
Submaster max. output level
+22 dBu, balanced/unbalanced
Fader range +10 dB to off
MAIN MIX SECTION
Noise
Bus noise, fader @ 0 dB –102.0 dBr All input channels
assigned & set @ 0 dB gain,
channels muted –92.0 dBr
All input channels assigned & set
@ 0 dB gain–87.0 dBr
Submaster max. +28 dBu,
balanced/output level +22 dB,
unbalanced
Singapore Tel.: +65 6845 1800
Fax: +65 6214 0275
Australia Tel.: +61 03 9877 7170
Fax: +61 03 9877 7870
Fader range
Aux returns gain range
Aux sends max. output level
SYSTEM DATA
Distortion
(THD + Noise)
Frequency response
20 Hz to 40 kHz
10 Hz to 120 kHz
POWER SUPPLY
Power consumption
Fuse
Mains connector
PHYSICAL/WEIGHT
Dimensions
(H x W x D)
Weight
Please note these specifi cations are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not to be
made public in any manner. This document is solely the property of The MUSIC
Group, or one of its subsidiaries, and must be surrendered upon request of
the owner.
Japan Tel.: +81 3 5281 1180
Fax: +81 3 5281 1181
Page 6 of 6
+10 dB to off
+20 dB to off
+22 dBu
0.007% @ +4 dBu,
1 kHz, bandwidth 80 kHz
–1 dB (any input to any output)
–3 dB
max. 150 W
100 - 240 V~, 50/60 Hz
T 2 A H 250 V
Standard IEC receptacle
3.5 x 40x 20.7"
89 x 1016 x 526 mm
53 lbs/24 kg