Remove the switch cover (see
6.
Remove the fan (see
7.
Remove the heat sink (see
8.
Remove the processor:
Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
1.
until you hear a click.
Lift the processor (2) straight up and remove it.
2.
NOTE:
the processor slot when you install the processor. The illustration below shows the processor removal
steps for the HP Compaq 6715 computer model.
NOTE:
computer model.
Reverse this procedure to install the processor.
ENWW
Switch cover on page
Fan on page
Heat sink on page
The gold triangle (3) on the processor must be aligned with the triangle (4) embossed on
The illustration below shows the processor removal steps for the HP Compaq 6710
70).
71).
72).
Component replacement procedures
75