7.3. Installation as an AP (access
point)
Select AP mode, if you want to operate the repeater
as a wireless access point. In this mode, the repeater
acts as a wireless interface for communication with the
network. For example, you can connect the repeater
to a network router that has no wireless interface so
that devices can now access the network router via the
repeater.
7.3.1. Configuration as an AP
Set the mode selection switch
to AP.
Connect the repeater to an
easily accessible AC 230 V
50/60 Hz mains socket.
Switch on the repeater by
pressing the POWER button.
The POWER LED lights up.
After Sales Support
Telephone:
Internet:
1300 884 987
www.medion.com.au
AP
Repeater
Client
Signal
WLAN
Power
WPS
LAN
WPS
35 of 78