Initial Operation; Setting The Operating Mode; Operating Mode; Installation As Range Extender (Repeater) - Medion P85019 Instruction Manual

6. Initial operation

6.1. Setting the operating mode

Use the mode switch on the WiFi Range Extender to
switch the device to the operating mode that you wish
to use. The usage possibilities are described in the
following chapter.

7. Operating mode

7.1. Installation as range extender
(repeater)
Use the repeater mode to use the WiFi Range Extender
to extend the range of your wireless network. This
will reduce the data transmission rate of the wireless
network by half as the repeater must also communicate
with the clients and the wireless access point.
PLEASE NOTE!
When using the device as a repeater for
the first time, place the repeater as close as
possible to the access point to which it is to be
connected. After successful installation, you
can reposition the repeater where the signal is
to be amplified.
After Sales Support
Telephone:
Internet:
1300 884 987
www.medion.com.au
19 of 78