Changing The Time/Date Format - Accu-Chek Integra Complete Instructions For Use

3.3

Changing the time/date format

You can choose between the 24-hour format (0:00 to 23:59), in which
case the date format is DD-MM (day followed by month), and the 12-
hour format (1 to 12 o'clock with a.m. or p.m.). In the latter case the
date format changes to MM-DD (month followed by day).
Check the meter is off.

Press the SET button.

The meter turns on without advancing a test strip from the drum.
Press the SET button repeatedly until "24h" is

displayed. 24-hour format is selected.
The time is set to 00:00.
Press the MEMO button to select 12-hour format.

In the display you see "12h" and the time is set
to 12:00 a.m.
If you press the MEMO button again, "24 h" reappears.
42
If you wish to set the time, leave the meter turned on and proceed to the
next section, 3.4.
If not, press the ON/OFF button to turn the meter off. The current
settings will be saved automatically.
i

AM
If you do not set the time and date, these fields will be filled
with zeros during testing. Your blood glucose test results saved
in memory will be numbered consecutively. However, only test
results that are saved with the time and date will be included
in the statistics (see Chapter 5 "Using the Accu-Chek Integra
meter as an electronic notebook").
43