Inserting Or Replacing The Test Strip Drum - Accu-Chek Integra Complete Instructions For Use

2.4 Performing a full display test
Release the MEMO button.

The standard display test screen that is shown each time the meter
is turned on appears briefly. When it disappears, the meter is in
memory. If no results have yet been saved, three bars are displayed.
mmol/L
MEMO
CTRL
Standard display test
You can perform a full display test whenever you wish. If there
i
are already results saved in memory, when you release the
MEMO button the most recently saved result is displayed.
Press the ON/OFF button to turn the meter off.

i The meter automatically turns off if you keep the MEMO button
pressed for more than 90 seconds.
26
MEMO
No results in memory
2.5

Inserting or replacing the test strip drum

Read the package insert that came with the test strip drums.

If the meter is on, turn it off.

Wait for the motor to stop before you open the meter.

Only open the meter when it is turned off and the motor is not
running. Opening the drum compartment when the meter is
turned on may result in damage to the meter.
27