HP compaq Hardware Manual page 90

9. Insert the new memory module:
a. Align the keyed (notched) edge of the module with the
b. Press the module into the slot from a 45-degree angle
Inserting the new memory module
10. Replace the keyboard.
11. Replace the Quick Launch button bezel.
12. Replace the keyboard screws located on the bottom of the
notebook.
13. Replace the battery packs.
14. Reconnect AC power and external devices.
15. Restart the notebook.
Hardware Guide
keyed area in the expansion slot 1.
until it is seated, then push the module downward until
the retention clips snap into place 2.
Hardware Upgrades
8–13