Adding And Upgrading Memory Modules; Adding A Memory Expansion Module - HP compaq Hardware Manual

Hardware Upgrades

Adding and Upgrading Memory Modules

Å
WARNING: The memory compartments are the only
user-accessible internal compartments on the notebook. All other
areas that require a tool to access should be opened only by an
authorized service provider.
Å
WARNING: Failure to unplug the power cord and remove all battery
packs before installing a memory expansion board can damage the
equipment and expose you to the risk of electrical shock.
Ä
CAUTION: Electrostatic discharge (ESD) can damage electronic
components. Before beginning any procedure, ensure that you are
discharged of static electricity by touching a grounded metal object.
For more information, refer on this CD to the Regulatory and Safety
Notices guide.
The notebook has 2 memory slots. The primary memory slot is
located under the keyboard. The primary memory slot is
populated at the factory. The memory expansion slot is located on
the bottom of the notebook.
The memory capacity of the notebook can be upgraded first by
adding a memory module to the expansion slot and then by
upgrading the memory module in the primary memory slot.

Adding a Memory Expansion Module

To add a memory expansion module:
1. Shut down the notebook. (If you are not sure whether the
notebook is off or in Hibernation, turn the notebook on by
pressing the power button. Then shut down the notebook
through the operating system.)
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
8–6 Hardware Guide