Using A Usb Device; Enabling Usb Legacy Support - HP compaq Hardware Manual

USB hubs can be connected to a USB connector on the notebook
or on an optional Port Replicator, or to other USB devices. Hubs
support varying numbers of USB devices and are used to increase
the number of USB devices in the system. Powered hubs must be
connected to external power. Unpowered hubs must be connected
either to a USB connector on the notebook or to a port on a
powered hub.

Using a USB Device

A USB device functions in the same way as a comparable
non-USB device, with one exception. By default, USB devices do
not function unless an operating system that supports USB is
loaded.
Some USB devices may require additional support software,
which is usually included with the device. For more information
and software installation instructions, refer to the documentation
included with the device.

Enabling USB Legacy Support

You must enable USB legacy support to:
■
Use a USB keyboard, mouse, or hub connected to a USB
connector on the notebook during startup or in a
non-Windows application or utility.
■
Boot from an optional external MultiBay.
To enable USB legacy support:
1. Turn on or restart the notebook.
2. Press
displayed in the lower left corner of the screen.
❏
❏
3. Select Advanced menu > Device Options.
Hardware Guide
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
External Devices
F2.
F1.
7–3