Selecting Power Conservation Settings - HP compaq Hardware Manual

■
Stop or remove a PC Card or SD card that you are not using.
■
Use the
screen brightness as you need it.
■
Use optional powered speakers instead of the internal
speakers, or use the volume buttons to quickly raise and
lower system volume as needed.
■
Turn off a device connected to the S-Video connector by
using the
device in Windows.
■
Run the notebook on external power while formatting a
diskette.
■
If you leave your work, initiate Standby or Hibernation or
shut down the notebook.

Selecting Power Conservation Settings

To set the notebook to conserve power:
■
Select a short wait for the screen saver and select a screen
saver with minimal graphics and motion. Access screen saver
settings by selecting Start > Control Panel > Appearance and
Themes > Display icon > Screen Saver tab.
■
Follow the instructions on this CD in the Software Guide,
"Power" section, to:
❏
❏
Hardware Guide
and
Fn+F9
hotkeys or by turning off support for the
Fn+F4
In the operating system, select a Power Scheme with low
power-use settings.
In SpeedStep, select the Battery Optimized mode or
Maximum Battery Mode (Windows XP Professional
only).
hotkeys to quickly lower and raise
Fn+F10
Battery Packs
3–19