Computer Setup Defaults - HP Pavilion dv1300 Maintenance And Service Manual

Computer Setup Defaults

To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select Exit > Load Setup Defaults.
3. Press
4. Press enter to confirm the return to default configuration.
5. To confirm the restoration, press
6. Select Exit > Exit Saving Changes, and then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored,
and any identification information you have entered is saved.
Maintenance and Service Guide
f10
To change the language, use the arrow keys to select the
Advanced menu, select Language Support, and then
press or until the appropriate language is
F5 F6
highlighted. Press
Advanced menu.
To view navigation information, press
.
f9
while the "Press <F10> to enter Setup"
to save your selection and exit the
F10
f10
Troubleshooting
.
f1
.
2–3