HP Pavilion dv1300 Maintenance And Service Manual page 171

✎
Steps 5 and 6 apply only to HP Compaq nx4820 and
Compaq Presario V2300 models.
5. Release the ZIF connector 1 to which the LED board cable is
connected and disconnect the cable 2 from the system board.
6. Remove the two PM2.0×3.0 screws 3 that secure the LED
board to the top cover.
Removing the LED Board Screws, HP Compaq nx4820 and
Compaq Presario V2300 Models Only
7. Remove the LED board.
Reverse the above procedure to install the LED board.
Maintenance and Service Guide
Removal and Replacement Procedures
5–65