HP Pavilion dv1300 Maintenance And Service Manual page 151

2. Turn the USB/S-Video controller board upside down with
the USB port facing you.
3. Remove the two PM1.5×3.5 screws 1 that secure the
Bluetooth board to the USB/S-Video controller board.
4. Disconnect the Bluetooth board cable 2 from the
USB/S-Video controller board.
5. Remove the Bluetooth board 3.
Removing the Bluetooth Board
Reverse the above procedure to install the Bluetooth board.
Maintenance and Service Guide
Removal and Replacement Procedures
5–45