Functions; Operating Instructions; Tool Set Up; Changing The Blade - Chicago Electric 67080 Set Up And Operating Instructions Manual

Functions

Trigger (67)
Base
Guard
(43)
Spindle (37)
Flange (40)
Trigger (67)
Height Lock
Lever (23)
Protective Guard (35)

operaTing inSTruCTionS

read the enTire imporTanT
SaFeTY inFormaTion
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
SKU 67080
Spindle Lock
Button (18)
Saw Blade (39)
Protective Guard (35)
Safety Button
Base Plate
(28)
Figure 1
For technical questions, please call 1-800-444-3353.
From aCCiDenTal
operaTion:
Turn the power Switch of the
tool off and unplug the tool
from its electrical outlet
before performing any
Dust inspection, maintenance, or
Collector
cleaning procedures.
Port
Base

Changing the blade

Plate
(28)
1. Place the Saw on its side on a flat
surface.
2. While depressing the Spindle Lock
Button (18), insert the Spanner (72)
in two of the holes on the Flange
(40) and rotate counterclockwise to
unthread the Flange. Release the
Spindle Lock Button and remove the
Blade (39).
3. Replace the old Blade with a new
Blade, making sure that the Saw
Base
teeth and arrow on the Blade point in
Plate
the same direction as the arrow on
Lock
the machine body.
(58)
4. Depress the Spindle Lock Button and
re-thread the Flange in place. Tighten
with the Spanner.
5. Check that the Saw Blade turns
freely.

adjusting the Cutting Height

1. Place the Saw, Blade side down on
the floor, positioned near the door to
be trimmed.
2. Release the Height Lock Lever (23) if
it is not already released.

Tool Set up

To preVenT
SeriouS injurY
Page 13