Door Switch Removal; Oven Liner Removal - GE JB960 B Technical Service Manual

DOOR SWITCH REMOVAL

The door switch can be accessed through two
methods. If you have small hands you can ac-
cess the switch from the top of the range. If you
have large hands, you will need to remove the
left side of the range to access the switch.
If You Have Small Hands:
1. Remove the cooktop.
2. Remove the bracket across the top/front
of the range. This bracket is held in place
with 6 torx screws. Once the bracket is
removed, you can access the switch.
3. To remove the switch, depress inward on
the locking tabs while pulling outward on
the switch body.
If you Have Large Hands:
1. Remove the cooktop.
2. Remove the left side panel of the range.
3. To remove the switch, depress inward on
the locking tabs while pulling outward on
the switch body.

OVEN LINER REMOVAL

Should it ever become necessary to replace the
oven liner (customer damage), you can do so,
following the steps listed below:
1. Remove the cooktop.
2. Remove both side panels and metal cov-
ers (metal insulation covers).
3. Remove the bake element.
4. Remove two ¼ inch screws in the back of
the cabinet (A) which secure the liner to
the rear wall of the range.
5. From the back of the range disengage the
two metal hooks of the liner, which engage
into the back wall of the range (B). Do this
by pushing upward on the hooks with a
metal object (screwdriver blade) while
pushing forward at the same time
6. From the back of the range, disengage the
oven lamp clip which secures the lamp to
the rear wall of range (C).
7. From the back of the range, remove the
following.
a. Convection fan wiring (caution: term-
inal connections are tight & fragile).
b. Oven lamp wiring
c. Sensor wiring (disconnect plug)
d. Broil element wiring
e. Convection element wiring
A
B
BACK OF RANGE WITH ELECTRICAL
SHIELD AND LAMP SOCKET COVER
– 18 –
DEPRESS SWITCH
LOCKING TABS
TO RELEASE
C
B
REMOVED
A