GE Profile PHB925SB1SS Technical Service Manual page 7

5 ¾" Min. Dia. 5-3/4" Min. Dia.
4-3/4" Min. Dia.
Pan Size
Pan Size Pan Size
LR
5 ¾" Min. Dia.
5-3/4" Min. Dia.
Pan Size
Pan Size
LF
Using the correct size cookware
Each cooking element requires a MINIMUM
pan size. If the pan is properly centered, and
4 ¾" Min. Dia.
of the correct material, but is too small for
Pan Size
RR
the cooking element, the element cannot be
activated. The power level setting displayed
will fl ash for approximately 30 seconds, then
7" Min. Dia.
Pan Size
will turn off.
7" Min. Dia.
Pan Size
RF
Cookware larger than the element ring may
be used; however, induction heating will only
occur above the element.
For best results, the cookware must make
FULL contact with the glass surface.
Do not allow the bottom of the pan or
cookware to touch the surrounding metal
cooktop trim.
For best performance, match the pan size
to the element size. Using a smaller pot on a
larger burner will generate less power at any
given setting.
– 7 –
(Continued next page)