System Configuration Menu - HP Compaq 516 Maintenance And Service Manual

System Configuration Menu

✎
Some of the listed System Configuration options may not be supported by your computer.
Select
Language
Boot Options
Device Configurations
Maintenance and Service Guide
To do this
Change the Computer Setup language.
■ Set a Startup Menu delay (in seconds).
■ Enable/disable Custom Logo (disabled by default).
■ Enable/disable Display Diagnostic URL (enabled by default).
■ Enable/disable CD-ROM boot (enabled by default).
■ Enable/disable SD Card boot (enabled by default).
■ Enable/disable floppy boot (enabled by default).
■ Enable/disable PXE Internal NIC boot (disabled by default).
■ Set the Express Boot Popup delay in seconds.
■ Set the boot order.
■ Enable/disable USB legacy support (enabled by default). When
enabled, USB legacy support allows the following:
❐ Use of a USB keyboard in Computer Setup even when a Windows
operating system is not running.
❐ Startup from bootable USB devices, including a hard drive,
diskette drive, or optical drive connected by a USB port to the
computer.
■ Enable/disable fan always on while connected to an AC outlet
(disabled by default).
■ SATA (Serial Advanced Technology Attachment) device mode. The
following options are available:
❐ AHCI (Advanced Host Controller Interface)
❐ IDE (Integrated Drive Electronics)
✎
Availability of the options above varies by computer model.
■ Enable/Disable Unified Extensible Firmware Interface (UEFI) mode
(disabled by default).
Computer Setup
(Continued)
5–5