HP 430 Maintenance And Service Manual page 70
Notebook pc
Hide thumbs
Also See for 430:
- Limited warranty (33 pages) ,
- Quickspecs (30 pages) ,
- Limited warranty and technical support (17 pages)
Table of Contents
Advertisement
Remove the TouchPad button board and cable:
1.
Turn the top cover upside down, with the top toward you.
2.
Release the TouchPad board cable (1) and the TouchPad button board cable (2) from
the top cover. (The TouchPad board cable and the TouchPad button board cable are attached to
the top cover with double-sided tape.)
3.
Remove the four Phillips PM2.0×4.0 screws (3) that secure the TouchPad button board to
the top cover.
4.
Remove the TouchPad button board (4).
Reverse this procedure to install the TouchPad button board and cable.
62
Chapter 4 Removal and replacement procedures
Hide quick links:
Advertisement
Table of Contents
