Rear Panel Ports, Buttons, And Connector; Attach The Feet - NETGEAR WN2500RPv2 User Manual

Rear Panel Ports, Buttons, and Connector

The following figure shows the ports, buttons, and connector on the rear panel of the
extender. The figure show the extender in upright position, with the feet attached. (For
information about attaching the feet, see
Figure 2. Rear panel

Attach the Feet

If you prefer to place the extender in upright (vertical) position, attach the feet that come with
the extender.
Although the extender functions well in either horizontal or vertical position, a horizontal
position might give a better performance.

To attach the feet:
1. Hold the extender in upright position with the left side of the extender pointing down.
2. Snap the feet onto the extender.
N600 WiFi Range Extender
Attach the Feet
Restore Factory Settings button
Ethernet LAN ports
Power connector
On/Off button
Overview
8
on page 8.)