Manage Advanced Wifi And Wps Settings - NETGEAR WN2500RPv2 User Manual

7. Click the Apply button.
Your settings are saved, and you are disconnected from the extender.
8. To continue to configure the extender, reconnect to the extender using the new IP address.

Manage Advanced WiFi and WPS Settings

The extender is already configured with the optimum settings. Do not change the advanced
settings unless directed by NETGEAR support. Incorrect settings might disable the extender
unexpectedly.

To view or change the advanced WiFi and WPS settings:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Advanced > Wireless Settings.
5. View or change the following settings as described in the following table:
Setting
Advanced Wireless Settings
Enable Wireless
Access Point (2.4GHz)
N600 WiFi Range Extender
Description
By default, the extender functions as a WiFi access point in the 2.4 GHz band.
Clear the Enable Wireless Access Point (2.4GHz) check box only if you want to
prevent WiFi devices from connecting to the extender in the 2.4 GHz band. LAN
devices can still connect to the extender over an Ethernet cable.
Manage the Extender Network and Security Settings
53