Table of Contents
Advertisement
Wireless Settings screen (for more information, see
page 43).
Note:
For information about using WPS to connect the extender to a WiFi
network during setup, see
Network
Use WPS with the Push Button Method
To use the Push Button method to connect a WiFi device to the extender's WiFi network, the
WiFi device that you are trying to connect must have a physical push button or a software
push button.
To let a WiFi device join the extender's WiFi network using WPS with the Push Button
method:
1.
On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2.
In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3.
Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4.
Select Add WPS Client.
The screen displays a description of the WPS method.
5.
Click the Next button.
By default, the Push Button (recommended) radio button is selected.
6.
Either click the
extender.
Both Link Rate LEDs
minutes.
N600 WiFi Range Extender
Connect the Extender with WPS to a WiFi
on page 13.
button onscreen or press the WPS button on the right side panel of the
and the Device to Extender LED
Manage the Extender Network and Security Settings
Manage the Extender WiFi Settings
41
on
blink green for two
Hide quick links:
Advertisement
Table of Contents
