NETGEAR WN2500RPv2 User Manual page 36

Note: If your router does not support the 5 GHz band (not all routers do) or
you do not yet want to change the 5 GHz network to which the extender
connects, click the Skip button, and go to
8. Enter the security settings for the existing 5 GHz network:
• If the network uses WPA-PSK, WPA2-PSK, or a combination of these options, do the
following:
a. In the Password (network key) field, type the network passphrase (also called
a password or network key).
b. Click the Continue button.
• If the network uses WEP, do the following:
a. From the Encryption Strength menu, select the encryption strength (64 bit or
128 bit).
b. Specify the active key by selecting the Key 1, Key 2, Key 3, or Key 4 radio
button (only one key can be the active key) and type the value for the key.
For 64-bit WEP, type 10 hexadecimal digits (any combination of 0–9, A–F). For
128-bit WEP, type 26 hexadecimal digits. The key values are not case-sensitive.
c. Click the Continue button.
9. Wait about two minutes while the extender changes the WiFi network or networks.
10. Use a WiFi network manager on the computer or on a mobile device to reconnect to the
extender's WiFi network.
Manage the Extender Network and Security Settings
N600 WiFi Range Extender
Step 9
36
on page 65.