ULTRABASS BX4410/BX4410A 1.1.1 Patented Dynamizer technology 1. INTRODUCTION 1.2 Before you get started 1.2.1 Shipment 1.2.2 Initial operation 1.1 The design concept 1. INTRODUCTION...
ULTRABASS BX4410/BX4410A SEND/TUNER RETURN D.I. LINE OUT Fig. 2.5: BX4410/BX4410A rear panel (section 2) SPEAKER ® ® 2.2 Rear panel 3. WIRING EXAMPLES 3.1 Standard setup comprising footswitch and external loudspeaker Fig. 2.4: BX4410/BX4410A rear panel (section 1) POWER MAINS CONNECTION...
Page 7
3.4 Connection of a multi-effects processor 3.3 Connecting several loudspeakers Fig. 3.4: Connection of a multi-effects processor 3.5 Setup for master/slave operation 3.5.1 ULTRABASS BX4410/BX4410A as master 3.5.2 ULTRABASS BX4410/BX4410A as slave controlled by an external amp/preamp Fig. 3.3: Connection of two speaker cabinets...
Neutrik Speakon ® ® BEHRINGER constantly strives to maintain the highest quality standards. Modifi- cations may be made, if necessary, without prior notice. The specifications and appearance of the equipment may therefore differ from those listed or illustrated. 7. SPECIFICATIONS...
Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH.