Table of Contents
Advertisement
b.
Remove the display hinges (2).
The display hinges are included in the Display Hinge Kit, spare part number 746666-001.
11.
If it is necessary to replace the WLAN antenna cables and transceivers:
a.
Detach the WLAN antenna transceivers (1) from the display enclosure. (The WLAN antenna
transceivers are attached to the display enclosure with double-sided adhesive.)
b.
Release the WLAN antenna cables from the clips (2) and routing channel built into the top
edge and right side of the display enclosure.
Component replacement procedures
87
Hide quick links:
Advertisement
Table of Contents
