Table of Contents
Advertisement
Display assembly
NOTE:
The display assembly is spared at the subcomponent level only. For more display assembly
spare part information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the Battery (see
a.
Service cover (see
b.
Hard drive (see
c.
Optical drive (see
d.
Keyboard (see
e.
Top cover (see
f.
Speakers (see
g.
System board (see
Remove the display assembly:
1.
Release the display panel cable from the routing clips (1) and channel built into the
base enclosure.
80
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
40), and then remove the following components:
Service cover on page
Hard drive on page
42)
Optical drive on page
Keyboard on page
52)
Top cover on page
55)
Speakers on page
64)
System board on page
41)
50)
67)
Hide quick links:
Advertisement
Table of Contents
