HP 340 G1 Maintenance And Service Manual page 64

c. Optical drive (see
d. Keyboard (see
NOTE:
When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
● Fingerprint reader module (See
●
TouchPad button board (See
● Card reader board (See
●
Power button board (See
Remove the top cover:
1.
Close the computer.
2.
Turn the computer upside down with the front toward you.
3. Remove the two rubber feet (1).
NOTE:
4. Remove the ten Phillips PM2.5×6.5 screws (2) that secure the top cover to the base enclosure.
5. Remove the two Phillips PM2.0×2.0 broad head screws (1) in the optical drive bay that secure
the top cover to the base enclosure.
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Keyboard on page
Fingerprint reader module on page
TouchPad button board on page
Card reader board on page
Power button board on page
The rubber feet are included in the Rubber Kit, spare part number 746669-001.
50)
52)
60)
62)
63)
59)