Comtrend Corporation CT-535 User Manual
  1. Manuals
  2. Brands
  3. Comtrend Corporation Manuals
  4. Wireless Router
  5. CT-535
  6. User manual

Comtrend Corporation CT-535 User Manual

Wireless adsl router
Hide thumbs Also See for CT-535:
Table of Contents

Advertisement

Quick Links

Download this manual
CT-535

Wireless ADSL Router

User's Manual
Version A1.3, November 20, 2003
261035-017
1

Advertisement

Table of Contents
loading

Related Manuals for Comtrend Corporation CT-535

Summary of Contents for Comtrend Corporation CT-535

  • Page 1: Wireless Adsl Router

    CT-535 Wireless ADSL Router User’s Manual Version A1.3, November 20, 2003 261035-017...
  • Page 2 Revision History Modified the following sections: ADSL Mode DHCP Configure Preface This manual provides information to network administrators. It covers the installation, operation and applications of the Wireless ADSL Router Warning Before servicing or disassembling this equipment, always disconnect all power and telephone lines from the wall outlet.

  • Page 3: Table Of Contents

    CHAPTER 1 INTRODUCTION............... 7 Overview ..................... 7 Features....................8 Application................... 9 Front Panel LED Indicators ..............10 CHAPTER 2 INSTALLATION ..............11 Preparing for Hardware Installation ..........11 Hardware Installation ................ 12 CHAPTER 3 LOGIN VIA THE WEB BROWSER ..........15 IP Address ..................
  • Page 4 Routing ....................34 4.7.1 Enable RIP ..................35 4.7.2 Static route configuration ..............36 Save....................37 Reboot ....................38 4.10 Retrieve default settings ..............39 CHAPTER 5 WEB ADVANCED CONFIGURATION ........40 ADSL Mode..................40 VLAN....................41 DHCP ....................43 5.3.1 Enable DHCP Server ................43 5.3.2 Add DHCP Server ................44 5.3.3...
  • Page 5 5.10.5 Show VCC quality .................70 5.10.6 PPPoE ..................70 5.11 PPPoA ..................... 71 5.12 IGMP ....................71 5.12.1 Add an IGMP entry................72 5.12.2 Delete an IGMP entry ..............72 5.13 Bridging ..................73 5.13.1 Bridge..................73 5.13.2 Spanning tree ................75 5.13.2.1. View STP Parameters ...............75 5.13.2.2.
  • Page 6 APPENDIX B: PIN ASSIGNMENTS ............... 92...

  • Page 7: Chapter 1 Introduction

    Chapter 1 Introduction Overview The wireless ADSL router combines cutting-edge wireless technology with routing/bridge functions. It enables multiple users to share a high speed ADSL connection, without connecting any wires. To ensure the security of your valuable data the router employs state-of-the-art security features such as WEP data encryption, L2TP, and IpSec pass through.

  • Page 8: Features

    Features The Wireless ADSL Router has the following features: Wireless built-in ADSL router IEEE 802.11b compliance 11Mbps/5.5Mbps/2Mbps/1Mbps data rates with auto-fallback support WEP data encryption Four 10/100 Base-T Ethernet ports for LAN connection Bridge/Router AAL5 for ATM over ADSL UBR/CBR/VBR ATM services VC-based and LLC multiplexing Up to 8 VCs Embedded SNMP agent and RFC MIB II...

  • Page 9: Application

    Application The following diagram shows a typical application of the router, which can be used for G.lite and G.DMT applications. Figure 1-1 Application...

  • Page 10: Front Panel Led Indicators

    Front Panel LED Indicators The front panel LEDs are shown in the picture below, followed by an explanation in the table below. Color Mode Function Power Green The router is powered up The router is powered down. Green Ethernet connection is established. Blink Data transmitting or receiving 1x~4x...

  • Page 11: Chapter 2 Installation

    Chapter 2 Installation Preparing for Hardware Installation The following equipment may be necessary to install the router: A VT-100 compatible terminal This terminal is essential to perform the initial configuration of the router. Normally this is a terminal with a VT-100 emulation program, such as Telix. An RJ45-to-DB9 cable to connect to the Console Port An RS232, RJ45-to-DB9 straight-through cable is required to connect the terminal to the device.

  • Page 12: Hardware Installation

    Hardware Installation Follow the instructions below to complete the hardware connections. Step 1 Connect the Line port to a telephone-line using the supplied RJ-11 cable; or if you wish to connect both the router and a telephone, connect the ADSL port to a micro filter or POTS splitter with a RJ11 connection cable. Step 2 To connect to a hub or PC, use a RJ45 cable.
  • Page 13 Step 3 (Optional) In order to manage your device through the console port you will need to use a straight-through cable with an RJ-45 connector to attach to the modem, and a female RS-232 connector to connect to the serial port on a PC. The PC must be equipped with a VT-100 emulation program, such as HyperTerminal 5 or Telix.
  • Page 14 Step 5 Attach the power adapter to the wall outlet or other AC source. Step 6 After all connections have been made, turn the power-switch to the on position. After power on, the router performs a self-test. Wait for a few seconds until the test is finished, then the router will be ready to operate.

  • Page 15: Chapter 3 Login Via The Web Browser

    Chapter 3 Login via the Web Browser This section describes how to manage the router via a Web browser from the remote end. You can use a web browser such as Microsoft Internet Explorer, or Netscape Navigator. It is best to set your display resolution to 1024 x 768. To change the resolution you can go to the Microsoft Windows control panel and click on the Display icon, and change the display settings.

  • Page 16: Login Procedure

    STEP 2: Click OK to submit the settings. STEP 3: Start your Internet browser with the default IP address 192.168.1.1. Login Procedure To log on to the system from the Web browser, follow the steps below: STEP 1: Start your Internet browser. STEP 2: Type the IP address for the router in the Web address field.

  • Page 17: Chapter 4 Web Basic Configuration

    Chapter 4 Web Basic Configuration From the Basic menu bar, you can verify the software version, change passwords, configure the WAN/LAN interfaces, set-up routing, save settings, reboot the device, and retrieve the factory default settings. Version Information To verify the software version of your router, from the Basic Menu bar, click on Version Information.

  • Page 18: Adsl Link Status

    ADSL Link Status To view the ADSL link status, click Link Status from the tool bar. The page includes the following information: ADSL Line Status Shows the current status of the ADSL line ADSL Mode Shows the ADSL standard that is currently configured. The ANSI, G.DMT, G.LITE, MULTI.

  • Page 19: Wan Setup

    WAN Setup Click WAN Setup from the tool bar and configure the WAN interface for these services: RFC1483 Bridged, RFC1483 Routed, PPPoE, PPPoA, and MER. The following are the common settings to set up these services. VPI and VCI LLC Encapsulation: With LLC encapsulation, a link control header is added to the Ethernet packet that identifies the protocol type (Ethernet).

  • Page 20: Rfc 1483 Routed

    ADD AN ENTRY To set up the RFC 1483 Bridged, configure the common fields on the top of the page and click the Add button to add the entry. MODIFY AN ENTRY To modify an entry, complete the following steps: STEP 1: Select the entry from the Current ATM PVC List, at the bottom of the WAN Setup page.
  • Page 21 STEP 3: Click Modify. DELETE AN ENTRY To delete an entry, Select it from the Current ATM PVC List, at the bottom of the WAN Setup page, and click the Delete button.

  • Page 22: Pppoe

    4.4.3 PPPoE PPPoE provides service providers similar billing and access control as present in dial- up services. In addition, with direct support to Ethernet it provides a low cost solution to supporting multiple hosts at the customer premises. PPPoE provides session authentication using Password Authentication Protocol (PAP) or Challenge Handshake Authentication Protocol (CHAP).
  • Page 23 Idle Timeout: defines the period of idle time (minutes) after which the PPPoE link will be terminated. Authentication: Defines the authentication code: PAP, CHAP or BOTH. If the authentication code is set to BOTH, the router will follow the authentication settings (PAP, CHAP) of the remote DSLAM.

  • Page 24: Pppoa

    4.4.4 PPPoA ADD AN ENTRY To set up PPPoA, click PPPoA, configure the common fields and the following fields. Click the Add button to add the entry. User name and Password: used for remote customers to login upon dialup. PPPoA is manually activated by entering startup commands from the page: Advanced>Configure PPPoA.

  • Page 25: Mer

    4.4.5 MER MAC Encapsulation Routing (MER) enables the ATU-R to route IP addresses on the RFC1483 bridged link. NAPT function is supported to allow multiple private IP addresses on the LAN to share a public IP address. To set up the MER service, configure the common fields, and then enter the IP Address and Subnet Mask under the MER section of the screen.

  • Page 26: Lan Ip Address

    LAN IP Address The default LAN IP address is 192.168.1.1. Click LAN Setup from the menu bar to configure the LAN IP address. Type the IP address and subnet mask. Click Apply to submit the settings. When the new IP address is applied, the Web configuration will be interrupted.

  • Page 27: Wlan Configuration

    WLAN Configuration Parameters that specifically deal with the wireless functions of your router can be accessed from WLAN Setup on the Basic menu bar. The menu is subdivided into several menus: WLAN Basic, WLAN Advanced, WLAN WEP, WLAN Filter, and WLAN Radio.

  • Page 28: Wlan Basic Parameters

    4.6.1 WLAN Basic Parameters To access the WLAN Basic parameters click on the WLAN Basic tab on the WLAN Settings screen. The WLAN Basic Parameters menu includes the parameters listed below. After changing any parameters, click on the Apply button to update the parameters, or click on the Restore button to retain the original settings.

  • Page 29: Wlan Advanced Functions

    4.6.2 WLAN Advanced Functions To access the WLAN Advanced parameters click on the WLAN Advance tab on the WLAN Settings screen. The WLAN Advanced Parameters menu includes the parameters listed below. After changing any parameters, click on the Apply button to update the parameters, or click on the Restore button to retain the original settings.

  • Page 31: Wlan Wep Parameters

    4.6.3 WLAN WEP Parameters: To access the WLAN WEP parameters click on the WLAN WEP tab on the WLAN Settings screen. This screen is used to set-up WEP security. WEP security uses an encryption keyword on all transmitted and received data. The parameters are described below.
  • Page 32 Key Type Disabled, 64 bits, 128 bits. This parameter determines the level of security. Disabled means no security, 128 bits provides the highest security. This parameter must match with the remote-clients. Key Generation Select Passphrase to enable automatic key generation, or Manually to manually enter each key. The manual key generation provides two forms, Hex decimal and ASCII string.

  • Page 33: Mac Filter

    4.6.4 Mac Filter This screen allows wireless access to be restricted or enabled based on a MAC address. Enter the following parameters. MAC filter status: Disable - de-activates MAC filtering, allow – permits access for the specified MAC address, deny –reject access of the specified MAC address. Click the SET button to submit the setting.

  • Page 34: Routing

    Routing Click Routing Setup from the menu bar to configure the routing functions. Routing functions includes RIP and static routing.

  • Page 35: Enable Rip

    4.7.1 Enable RIP To enable RIP, complete the following steps: STEP 1: Click Routing Setup from the menu bar. STEP 2: Select On in the Rip Status field. STEP 3: Select a RIP Version (Version 1 or Version 2) from the Version field. STEP 4: Click Apply to submit the settings.

  • Page 36: Static Route Configuration

    4.7.2 Static route configuration The Routes Configuration field allows you to add, modify, and delete a static route. Type the Destination Network ID, subnet mask, and next hop IP and click a button below to perform the requested function. Add: To add a static route complete the following steps: STEP 1: Click Routing Setup from the menu bar.

  • Page 37: Save

    Save To save the settings to Flash, click Save & Reboot from the menu bar. In the main pane, click Save.

  • Page 38: Reboot

    Reboot To reboot the router, click Save & Reboot from the menu bar. In the main pane, click on Reboot.

  • Page 39: Retrieve Default Settings

    4.10 Retrieve default settings To retrieve the default settings, click Erase & Reboot from the menu bar. In the main pane, click Erase.

  • Page 40: Chapter 5 Web Advanced Configuration

    Chapter 5 WEB Advanced Configuration ADSL Mode Click the ADSL Mode button from the Advanced menu bar. • There are four ADSL modes: ANSI, G.DMT, G.LITE, MULTI. The default ADSL mode is MULTI. MULTI mode enables the device to auto-adjust its mode to match the remote CO DSLAM.

  • Page 41: Vlan

    VLAN To configure the VLAN function, click VLAN from the Advanced menu bar. The following parameters are displayed: Parameters: VLAN: Select enable or disable to activate/deactivate the VLAN function. Forward DB Type : Used to configure the forwarding database learning type. There are two types of learning for the FDB: Multi and Single.

  • Page 43: Dhcp

    DHCP The Dynamic Host Configuration Protocol (DHCP) provides a centralized approach to allocating IP addresses. It allows IP addresses to be dynamically assigned on an as needed basis, from a pool of addresses. The DHCP server is enabled by factory default with the default IP address of the eth0 to be 192.168.1.1/24.

  • Page 44: Add Dhcp Server

    5.3.2 Add DHCP Server To add an entry, click the Add button, and fill out the following parameters. Click Apply to submit the settings. Interface: eth0/wlan0. This configures the interface that will provide the DHCP function. By factory default, the entry for interface eth0 is defined with the gateway address 192.168.1.1, and subnet mask 255.255.255.0.

  • Page 45: Disable Dhcp Server

    5.3.3 Disable DHCP Server To stop a DHCP Server, complete the following steps: STEP 1: Click DHCP from the menu bar. STEP 2: Choose a DHCP entry, and click Stop. 5.3.4 Delete DHCP Server To delete a DHCP Server, complete the following steps: STEP 1: Click DHCP from the menu bar.

  • Page 46: Dhcp Relay

    DHCP Relay The DHCP packet format is based on a BootP packet. As a result, DHCP uses the BootP relay agent to forward DHCP packets. This scheme provides interoperability between existing BootP clients and DHCP servers. The BootP relay agent uses the same criteria and methods for forwarding both DHCP and BootP packets.

  • Page 47: Disable The Bootp/Dhcp Relay

    5.4.2 Disable the BOOTP/DHCP Relay To disable the BOOTP/DHCP Relay complete the following steps: STEP 1: Access the BOOTP/DHCP Relay screen by clicking on DHCP on the Advanced Menu, and then click the BOOTP/DHCP Relay tab. STEP 2: In the DHCP Relay field, select Disable, and enter the IP Address you want to receive BOOT REQUEST or DHCP packets from clients.

  • Page 48: Dhcp Client

    DHCP Client Note: Before starting the DHCP Client function, the user needs to make sure that the DHCP Server is reachable; if the ADSL Router fails to get the IP Address from DHCP Server, the ADSL Router needs to be rebooted. The router can also be configured as a DHCP client.

  • Page 49: Snmp

    SNMP SNMP is a software entity that responds to information and action request messages sent by a network management station. The messages exchanged enable you to access and manage objects in an active or inactive (stored) MIB on a particular router.

  • Page 50: Modifying Snmp Parameters

    5.6.1 Modifying SNMP Parameters To modify the SNMP parameters, click the Modify button at the bottom of the screen. Click Apply to submit the settings. To configure the SNMP agent, click the Configure SNMP Agent button. After filling out the fields, click Apply to submit the settings.

  • Page 51: Modifying Traps

    5.6.2 Modifying Traps Click the Traps tab to configure the traps. After filling out the parameters, click Submit to apply the settings.

  • Page 52: Modifying Communities

    5.6.3 Modifying Communities Click the Communities tab to display the community entry. After filling out the parameters, click Submit to apply the settings. There is no community set up by factory default. To add or modify an entry, click the Configure Community button.

  • Page 53: Firewall

    Firewall The ADSL router provides packet filtering and stateful packet inspection. It has denial of service protection against attacks such as ICMP Flood, Ping of Death, IP spoofing, Port Scans, Land Attack, Tear Drop Attack, IP Source Route and WinNuke Attack.

  • Page 54: Enable/Disable The Firewall

    5.7.1 Enable/Disable the Firewall To enable the firewall click on the Enable/Disable tab on the Firewall screen and then check the Firewall Enable box and click the Apply button. Conversely, to disable the firewall uncheck the Firewall Enable box and click the Apply button.

  • Page 55: Remote Access

    5.7.2 Remote Access For each Remote Management Method that you wish to allow on the WAN port, select the method ticking its check box, and then click the Apply button to submit the setting. This function will in effect set up a Port Range mapping – and a Mapping entry will be created.

  • Page 56: View Firewall Actions

    5.7.3 View Firewall Actions Click View Actions to display the list of currently configured firewall actions. The parameters are as follows: Action ID: Item number Interface: The interface the filtering rule is created on. Direction: The direction can be IN – only packets received are affected. OUT –only packets sent are affected or ANY –both packets sent and received are affected.
  • Page 57 Firewall Parameters Existing Action ID: If an action has already been established, check the box next to Existing Action ID and enter its Action ID. New Action: If a new action is required check the box next to New Action and then enter: Interface Name –the interface the action applies to, FW Action: Enter Allow, to enable packets to pass through the router, Deny to drop corresponding packets, Reject to reject packet with a response, e.g., sending a TCP reset, or...

  • Page 58: Nat

    The NAT menu in the Advanced menu bar allows setting up the Static NAT Mapping and Port Range Mapping. 5.8.1 Static NAT Mapping Static NAT Mapping allows a pool of local IP addresses to share a public IP address. It is a form of NAT that maps multiple Private IP addresses to a single Public IP address.

  • Page 59: Port Range Mapping

    5.8.2 Port Range Mapping The Port Range Mapping is used to set up the virtual server. A virtual server has two access ports: public and private. The public port is the open port where the Internet users access the virtual server. The local port is the port on the LAN that the virtual server is really accessed.
  • Page 60 Fill out the following fields and click Apply to submit the settings. Public Address This is the public address where Internet users access. Enter a specific IP address, or enter 0.0.0.0 to allow any IP Address (if you wish to use the NAT interface address enter 0.0.0.0).

  • Page 61: Configure

    Configure From this page, you can configure the interfaces, VCC, PPPoE, PPPoA, DNS & Default Gateway, and NAT.

  • Page 62: Configure Interface

    5.9.1 Configure Interface To configure an interface, select it by clicking in the round-box on the left in the screen. Then click on the Configure Interface button at the bottom of the screen. Note the following: Interfaces: eth0 displays the LAN interface. mer0 displays the interface configured for MER mode.
  • Page 63 The following is the screen shot for the LAN interface (eth0) after choosing eth0 and clicking the Configure Interface button. The following is a screen shot for the ATM interface.

  • Page 64: Dns & Default Gateway

    5.9.2 DNS & Default Gateway To configure the DNS and default gateway, complete the following steps: STEP 1: Click on Configure in the menu bar. STEP 2: Click on DNS and default gateway at the bottom of the configuration page. STEP 3: Complete the fields below: Domain Name: user-defined Primary DNS server: Enter the primary server IP address.

  • Page 65: Nat

    5.9.3 NAT The screen below is accessed by clicking the NAT button on the Configuration screen. To enable NAT check the Enable NAT box and the select the interface that you wish to enable NAT on. 1. From the configuration menu click on the NAT button at the bottom-right side of the screen.

  • Page 66: Vcc

    5.10 This screen lists all current VCC entries in the middle of the screen. From this screen you can also: List IPoA, Delete Encapsulation, Add a VCC, Delete a VCC, and Show VCC quality. 5.10.1 List IPoA To list IP over ATM information click on the IPoA button at the bottom-left of the screen.

  • Page 67: Delete Encapsulation

    The IPoA entry is set up from Advanced>Configure>VCC, Click the Add button on the List of VCC screen. 5.10.2 Delete Encapsulation To delete encapsulation first select a VCC entry and then click the Delete Encap button.

  • Page 68: Add A Vcc

    5.10.3 Add a VCC To add a VCC entry, complete the following steps: STEP 1: Click on the Add VCC button, the VCC screen will appear. STEP 2: Enter values for the parameters (explained below). STEP 3: Click the Apply button at the bottom of the page. vpi: Virtual Path Identifier (VPI) that identifies this ATM connection.

  • Page 70: Delete A Vcc

    5.10.4 Delete a VCC To delete a VCC entry, select the entry from the list of VCCs and then click on the delete button, at the bottom-right of the page. 5.10.5 Show VCC quality To view information regarding the VCC quality, click on the Show VCC Quality button, at the bottom-right of the page.

  • Page 71: Pppoa

    5.11 PPPoA This section will describe how to start, stop, delete, and set a default PPPoA entry. The PPPoA page can be accessed by clicking on Configure in the Advanced menu bar. To start, stop, delete, or set as default a PPPoA entry first select the entry from the List of PPPoA entries, and then click the corresponding button at the bottom of the page.

  • Page 72: Add An Igmp Entry

    5.12.1 Add an IGMP entry To add an IGMP proxy, complete the following steps: STEP 1: Select IGMP Proxy, from the menu bar. STEP 2: Click Add at the bottom of the screen. STEP 3: Select Proxy interface, router interface, or both, by checking the box next to the interface and then use the pull-down menu to the left to select the eth, atm, or ppp Interface.

  • Page 73: Bridging

    5.13 Bridging 5.13.1 Bridge The Bridge window displays the configured Bridging PVC entries of the interfaces. There are four buttons at the bottom of the main-pane: Group Info, Add PVC, Flush, and Disable. ARP Proxy: You can enable the ARP Proxy function by ticking its check box and clicking the Set button.
  • Page 74 GroupInfo: This configures the LAN packets that will travel through the LAN interface to the selected WAN interfaces. If you wish to change the interfaces that are configured you must first click on the Flush button (to remove the current configuration), and then click on the Group Info button, select the group interfaces and then click the Apply button.

  • Page 75: Spanning Tree

    5.13.2 Spanning tree To access the spanning tree menu click the Spanning Tree tab, located at the top of the Bridging screen. 5.13.2.1. View STP Parameters To view the STP parameters, click the STP parameters tab, located at the bottom of the Spanning Tree screen.

  • Page 76: To Configure Stp Parameters

    5.13.2.2. To configure STP parameters STEP 1: Click the Spanning Tree tab, located at the top of the Bridging screen. STEP 2: Click the Configure Port button. STEP 3: Configure the parameters. STEP 4: Click the Apply button. 5.13.2.3. Enable/Disable STP If you wish to Enable/Disable a STP entry, select the entry and then click the Enable or Disable Button, which is located at the bottom-right of the Spanning Tree screen.

  • Page 77: Filters

    5.13.3 Filters Filtering is a type of firewall that is useful to increase network security or to limit unwanted traffic. Filters for this device are based on MAC addresses. The page opens with a list of the currently configured filter entries. From this page, you can also view Filter Parameters, add a filter, delete a filter, modify a filter, or flush filter parameters.

  • Page 78: Add A Filter Entry

    5.13.3.2. Add a filter entry To add a filtering entry, complete the following steps: STEP 1: Click the Add button at the bottom of the Filters page. STEP 2: Enter the MAC address STEP 3: Set the Frame to forward to forward packets which match the MAC address, or Drop, to drop matching packets.

  • Page 79: Layer 2 Bridge Filtering

    5.13.4 Layer 2 bridge filtering L2 Filters for this device are based on MAC addresses. The page opens with a list of the currently configured L2 bridge filter entries. Packets are dropped or accepted according to the conditions set up in each entry. From this page, you can also view Filter Parameters, add a filter, or delete a filter.

  • Page 80: Enable/Disable L2 Filtering

    5.13.4.1. Enable/Disable L2 filtering If you wish to Enable/Disable Bridge L2 filtering, click Enable or Disable and click the Set button. This setting applies to the list of layer 2 bridge filtering entries. 5.13.4.2. Add a Bridge L2 filter entry To add an L2 filtering entry, complete the following steps: STEP 1: Complete the parameters on the screen: Priority: Enter a priority value from 0-19.

  • Page 81: Chapter 6 Web Performance Monitoring

    Chapter 6 Web Performance monitoring ADSL Link Status To view the ADSL link status, click Link Status on the tool bar. ADSL Line Status Shows the current status of the ADSL line ADSL Mode Shows the ADSL standard that is currently configured. The ANSI, G.DMT, G.LITE, MULTI.

  • Page 82: System Statistics

    System Statistics To view the system statistics, click on the System Statistics button located near the bottom of the menu-bar. Statistics are recorded regarding Interfaces, TCP-IP, and DHCP-Lease. 6.2.1 Interface Statistics To display the interface statistics, click the Interface tab, located at the top-left of the System Statistics screen.

  • Page 83: Tcp-Ip

    6.2.2 TCP-IP To view TCP-IP statistics click on the TCP-IP tab at the top of the System Statistics page. The TCP-IP page displays the IP statistics, UDP statistics, TCP statistics, and ICMP statistics. 6.2.3 DHCP-Lease To view DHCP-Lease statistics click on the DHCP-Lease tab at the top of the System Statistics page.

  • Page 84: Firewall Statistics

    Firewall Statistics To view the firewall traffic statistics, click Firewall Statistics from the Advanced menu. It records the session information, including TCP, UDP, ICMP, GRE, AH, and ESP. Each session protocol is represented by a number. For example, 1 is for ICMP, GRE for 47;...

  • Page 85: Atm Statistics

    ATM Statistics Click on ATM Statistics on the menu-bar to display the ATM Statistics. The ATM Statistics page monitors information for AAL5 and Encapsulation. 6.4.1 AAL5 The AAL5 page shows the AAL5 statistics. 6.4.2 Encapsulation Click on the SNDCP tab to display encapsulation statistics. This page displays the VCs that are running.

  • Page 86: Chapter 7 Web Diagnostics

    Chapter 7 Web Diagnostics To access the Diagnostics screen, click the Diagnostics button, which is located on the menu bar. The Diagnostics screen has two test functions: OAM Loopback and Ping test. OAM Loopback STEP 1: Click the Diagnostics button, on the menu bar. STEP 2: Click the Loopback tab on the Diagnostics screen.

  • Page 87: Ping

    Ping A Ping test is used to verify the status of a network connection after the RIP or static route function is enabled. Ping sends a request message to the host and waits for a return message. This diagnostic function can verify if the remote host is reachable. Ping can also measure the round-trip time to the remote host.

  • Page 88: Chapter 8 Firmware Upgrade

    Chapter 8 Firmware Upgrade Follow the steps below to upgrade the firmware version of the wireless router via the FTP: STEP 1: Connect the Router to a PC using the LAN cable. Set the PC to the same subnet as the router (192.168.1.x/24). STEP 2: Restore the default parameters of the wireless router by holding down the device’s Reset button until the WLAN LED starts blinking (about 5 seconds).
  • Page 89 STEP 8: After you see the message Type set to I, type: hash STEP 9: After you see the message Hash mark printing, type: put <filename > app.1 (if the file name has extension, also type the extension. Example: put eagle.ct app.1 STEP 10: After a moment, the file should begin transferring.

  • Page 90: Appendix A: Specifications

    Appendix A: Specifications Wireless Card Standard IEEE802.11b Encryption 64, 128-bit Wired Equivalent Privacy (WEP) Data Encryption Channels 11 Channels (US, Canada) 13 Channels (Europe) 14 Channels (Japan) Data Rate 11Mbps / 5.5Mbps / 2Mbps /1Mbps Auto-Fallback RF Frequency 2412 MHz – 2484 MHz (Japan) 2412 MHz –...
  • Page 91 Routing Functions Routing Static route, RIP, and RIPv2 NAT/PAT Security Authentication protocols PAP, CHAP, MS-CHAP VPN features PPTP/L2TP pass through Power Supply 100, or 220 VAC Dimensions 205 * 145 * 48 mm Specifications are subject to change without notice...
  • Page 92 Appendix B: Pin Assignments Pin Definitions of the LAN port Pin number Definition Pin number Definition Transmit data+ 5 Transmit data- 6 Receive data- Receive data+ 7 Note: NC means No connection Pin Assignments of RJ11 Port Definition Definition RING Note: NC means No connection Console cable DB9 End Pins...

Table of Contents