Using The Meter As A Notebook; Memory - Accu-Chek Go Instructions For Use Manual

6

Using the meter as a notebook

6.1

Memory

Your meter has a 300-location memory for saving results together with
their time and date (only when the time and date have been set in the
meter). You do not need to save the results specially. The meter
automatically saves all results and numbers them consecutively. The
most recent result is always saved in memory location 1, the result pre-
ceding it in memory location 2, and so on, up to memory location 300. If
all the memory locations are occupied, the result in location 300 is
erased following the latest test, and all the remaining results are shifted
down one place to make room for the most recent result, which is then
saved in memory location 1.
In addition to the results, the time and the date, your meter also saves
other important test-related information. Results flagged as perfor-
mance check results (see Chapter 8 "Checking your meter") are dis-
played together with the bottle symbol . Results obtained at a tempera-
ture outside the permitted range are displayed together with the
thermometer symbol . Please refer to Chapter 13.1 "Symbols shown in
the display" for a complete list of symbols.
96
Using the meter as a notebook