Light Conditions - Accu-Chek Go Instructions For Use Manual

Never try to speed up warming or cooling of your meter, e.g. by
placing it on a radiator or in a refrigerator. Doing so can damage
the meter and cause it to give incorrect results. Incorrect results
can cause the wrong therapeutic decision to be taken and so
lead to serious adverse health effects.

12.2 Light conditions

Do not test in a place where the meter and test strips are exposed to
direct sunlight.
Keep the meter away from very strong light sources (e.g. direct
sunlight, studio lighting, spot lights, etc.). These may stop the
meter from functioning correctly and cause error messages to be
displayed.
Measurement and storage conditions
12
157