What You Need - Accu-Chek Go Instructions For Use Manual

8.1

What you need

To perform a performance check you need the following items:
O
your meter with the code chip inserted
O
the container of Accu-Chek Go test strips you took the code chip
from
O
Accu-Chek Go control solutions Control G1 (low glucose concentra-
tion) or Control G2 (high glucose concentration)
Note
To perform a performance check you need the concentration
i
table for the control solutions you are using. You will find this
table on the label attached to the test strip container.
126
Checking your meter