Table of Contents
Advertisement
Quick Links
12 VOLT CORDLESS BLOWER
Model 93726
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright
2005 by Harbor Freight Tools
. All rights reserved. No portion of this
©
®
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 93726
Summary of Contents for Chicago Electric 93726
- Page 1 12 VOLT CORDLESS BLOWER Model 93726 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
-
Page 2: Product Specifications
Provide barriers or shields as need- ELECTRICAL SAFETY Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the For technical questions, please call 1-800-444-3353. SKU 93726 Page 2... - Page 3 Turn off the Power Switch and disconnect the AC/DC Adapter from the electrical outlet before making any adjustments, changing accessories, or storing the Blower. Such preventive safety measures reduce the risk of starting the tool accidentally. For technical questions, please call 1-800-444-3353. SKU 93726 Page 3...
-
Page 4: Specific Safety Rules
Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Blower. When using a handheld power tool, always maintain a firm grip on the tool with both hands to resist starting torque. For technical questions, please call 1-800-444-3353. SKU 93726 Page 4... - Page 5 If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. For technical questions, please call 1-800-444-3353. SKU 93726 Page 5...
-
Page 6: Extension Cords
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure B.) For technical questions, please call 1-800-444-3353. SKU 93726 Page 6... - Page 7 RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* * Based on limiting the line voltage drop FIGURE B to five volts at 150% of the rated amperes. SYMBOLOGY FIGURE C For technical questions, please call 1-800-444-3353. SKU 93726 Page 7...
- Page 8 Blower may be conveniently stored in the Bracket. (See Figure D.) SCREW (22) WALL MOUNT BRACKET (21) (FRONT VIEW) BLOWER ATTACHED WALL MOUNT BRACKET (21) SCREW (22) FIGURE D REV 05/06 For technical questions, please call 1-800-444-3353. SKU 93726 Page 8...
- Page 9 Point the Blower Tube (11) toward the area to be cleared of dirt, leaves, and de- bris. Then, simply turn the Power Switch to its “ON” position. The Blower will run continuously until the Power Switch is turned to its “OFF” position. For technical questions, please call 1-800-444-3353. SKU 93726 Page 9...
-
Page 10: Inspection, Maintenance, And Cleaning
Replace the Battery Cover. Then, replace the Bolt to hold the Battery Cover in place. NOTE: The new Battery must be charged from 10 to 12 hours prior to using the Blower. (See Figure F.) BATTERY WIRE CONNECTORS BATTERY COMPARTMENT BATTERY FIGURE F For technical questions, please call 1-800-444-3353. SKU 93726 Page 10... -
Page 11: Troubleshooting
TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-800-444-3353. SKU 93726 Page 11... -
Page 12: Parts List & Assembly Diagram
AC/DC Adapter Blower Inlet Wall Mount Bracket Blower Tube Screw NOTE: Some parts are listed and shown for illus- tration purposes only, and are not avail- able individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 93726 Page 12...