Accu-Chek Compact User Manual page 41

014103 AC_Compact_ImP_CAN 12.08.2003
10
Display messages and troubleshooting guide
Display
Drum symbol and "E-2" flash
when the second or third
drum of a package is
inserted.
During subsequent tests the
drum symbol flashes.
78
78
11:23 Uhr Seite 78
Cause
The bar code on the drum is
damaged.
Action
Press the SET button. The monitor uses the bar code from the
first drum. The error message disappears. "CTRL" flashes in
the display, requesting you to perform a quality control check.
You can use all 17 test strips. The drum symbol continues to
flash in the display until a new drum is inserted.
All test strip drums in the same package
have a bar code unique to that package. Do
not try to code the monitor using drums from
a different package. Check you are using the
correct drums by comparing their lot codes.
The lot code is preceded by the symbol
If the message is still displayed, please con-
tact our Diabetes Care Info-Line (for details
see Chapter 12 "Customer support and service").
Warning
.
LOT
79
79