Accu-Chek Compact User Manual page 40

014103 AC_Compact_ImP_CAN 12.08.2003
10
Display messages and troubleshooting guide
Display
Drum symbol and "E-2" flash
when the first drum from a
new pack is inserted.
During subsequent tests the
drum symbol flashes.
76
76
11:23 Uhr Seite 76
Cause
The bar code on the drum is
damaged.
Action
Remove the drum from the monitor and return it to its
container. Insert the second drum from the package and use
all 17 test strips. When it is time to replace the drum, insert the
first drum with the damaged bar code. When the error mes-
sage is displayed, press the SET button. The monitor uses the
code from the previous drum. "CTRL" flashes in the display,
requesting you to perform a quality control check. You can use
all 17 test strips. The drum symbol continues to flash in the
display until a new drum is inserted.
All test strip drums in the same package
have a bar code unique to that package. Do
not try to code the monitor using drums from
a different package. Check you are using the
correct drums by comparing their lot codes.
The lot code is preceded by the symbol
If the message is still displayed, please con-
tact our Diabetes Care Info-Line (for address
see Chapter 12 "Customer support and service").
Warning
LOT .
77
77