Setting The Time - Accu-Chek Compact User Manual

014103 AC_Compact_ImP_CAN 12.08.2003
4.4

Setting the time

SET button
1. Check the monitor is off and press the SET button. The
monitor turns on without advancing a test strip from the
drum.
2. Press the SET button repeatedly until the hour field
flashes.
MEMO button
3. Press the MEMO button repeatedly to set the hour.
SET button
4. Press the SET button again. The minute field flashes.
34
34
11:23 Uhr Seite 34
MEMO button
5. Press the MEMO button repeatedly to set the minute.
ON/OFF button
6. If you wish to set the date, leave the monitor turned on
and proceed to step 2 in the next section. If not, press the
ON/OFF button to turn the monitor off. The current settings
will be saved automatically.
At temperatures below minus 10°C the
batteries do not have enough power to
keep the internal clock functioning. In this
event the clock must be reset.
Instead of pressing the MEMO button
repeatedly, you can hold it down to scroll
forward quickly.
Caution
Important
35
35