Setting The Year - Accu-Chek Compact User Manual

014103 AC_Compact_ImP_CAN 12.08.2003
4.2

Setting the year

SET button
1. Check the monitor is off and press the SET button. The
monitor turns on without advancing a test strip from the
drum.
2. Press the SET button repeatedly until the current year
setting flashes at top right of the display.
MEMO button
3. Press the MEMO button to adjust the year. The monitor
scrolls upwards through the year values. If you hold the
MEMO button down, the monitor fast-scrolls forward to
2032 and then begins again at 2000.
30
30
11:23 Uhr Seite 30
ON/OFF button
4. If you wish to define the date and time format, leave
the monitor turned on and proceed to step 2 in the next
section. If not, press the ON/OFF button to turn the moni-
tor off. The current settings will be saved automatically.
The year is not displayed during testing or
review of blood glucose test results. It is still
important, however, as February 29 in a leap
year will only be recognised when the year is
properly set. The current year setting is also
needed to unambiguously identify your blood
glucose test results if you transfer them from
your monitor's memory to a computer.
Important
31
31