Managing Power With A Parked Hard Drive; Using Hp 3D Driveguard Software; Using Optical Drives (Select Models Only); Identifying The Installed Optical Drive - HP Notebook PC User Manual

Managing power with a parked hard drive

If HP 3D DriveGuard has parked the drive, the computer will behave in the following ways:
●
The computer will not shut down.
●
The computer will not initiate sleep, except as described in the following note.
●
The computer will not activate battery alarms set on the Alarms tab in Power Options.
Before you move the computer, HP recommends that you either shut it down or initiate sleep.

Using HP 3D DriveGuard software

The HP 3D DriveGuard software enables you to perform the following tasks:
●
Enable and disable HP 3D DriveGuard.
NOTE:
DriveGuard. Privileges for non-administrator users can be changed by members of an
administrator group.
●
Determine whether a drive in the system is supported.
To open the software and change settings, follow these steps:
1. Double-click the icon in the notification area, at the far right of the taskbar.
– or –
Right-click the icon in the notification area, and then select Settings.
2. Click the appropriate button to change settings.
3. Click OK.

Using optical drives (select models only)

Optical drives include the following:
●
CD
●
DVD
●
Blu-ray (BD)

Identifying the installed optical drive

▲ From the Start screen, type e, click File Explorer, and then select Computer.
A list of all the devices installed in your computer, including your optical drive, is displayed.
70 Chapter 8 Drives
Depending on your user privileges, you may be unable to enable or disable HP 3D