Setting The Time - Accu-Chek Compact Reference Manual

4.4

Setting the time

SET button
1. Check that the meter is off and press the SET button.
The meter turns on without advancing a test strip from
the drum.
2. Press the SET button repeatedly until the
hour field flashes.
MEMO button
3. Press the
MEMO button repeatedly to set the hour.
SET button
4. Press the SET button again. The minute
field flashes.
34
MEMO button
5. Press the MEMO button repeatedly to set
the minute.
ON/OFF button
6. If you wish to set the date, leave the meter
turned on and proceed to step 2 in the next
section.
At temperatures below minus 10°C, the batteries do
not have enough power to keep the internal clock
functioning. In this event the clock must be reset.
Instead of pressing the MEMO button repeatedly, you
can hold it down to scroll forward quickly.
Caution!
Important!
35