Accu-Chek Compact Plus Reference Manual page 78

This message/symbol and means:
appears...
 
You applied blood or control solution
too soon.
Press the Test button to turn the

meter off and then on again. Repeat
the test with a new test strip. Wait
until the test strip symbol and blood
drop symbol flash in the display and
the meter beeps (provided the beep
tone is turned on). Now (and no ear-
lier than this) apply blood or control
solution to the test strip.

You applied too little blood or control
solution.
Turn the meter off and on again.

Repeat the test with a new test strip
and a larger amount of blood or con-
trol solution.
152

Symbols, display messages and troubleshooting
This message/symbol and means:
appears...
 



Symbols, display messages and troubleshooting
You moved or bent the test strip
while applying blood or control solu-
tion, or during measurement.
Turn the meter off and on again. Re-
peat the test with a new test strip.
You turned the meter off and on
again. The old test strip is still in the
meter.
Hold the meter upright so the test
strip is pointing downwards. Press
the Test button to turn the meter off
and allow the test strip to drop out.
If the test strip does not drop out,
remove it manually, even if you feel
some resistance.
153
10
