Setting The Hypo Indicator - Accu-Chek Compact Plus Reference Manual

The Time 2 setting is followed by the Time 3 setting.
24-hour
format
If you wish to set Time 3, proceed as described for Time 1.

The setting for Time 3 is followed by the hypo indicator setting.
If you do not wish to enter a hypo indicator, press the Test button to

turn the meter off.
The beep tone for the alarm clock function sounds for 20 seconds. To
stop the beep tone press any button (Test, M or S).
Your test reminder time settings remain saved, even if you turn the
alarm clock function off altogether (
54
12-hour
format
OFF).
Settings
You can turn off individual times for the alarm clock function by setting
the time to 0:00 (24-hour format) or 12:00 a.m. (12-hour format). Any
other time means that the alarm clock function is turned on for this
time.
To set the alarm clock function for midnight you must therefore set the
time to one minute to midnight (23:59 or 11:59 p.m.) or to one minute
after midnight (0:01 or 12:01 a.m.).
3.7

Setting the hypo indicator

To help you to recognize a possible hypo, you can set the meter to let
you know when your test result indicates a low blood glucose .You can
select what blood glucose level you want this indicator to have. There
are three options. If your blood glucose result is below the level you
have chosen, the warning hypo? appears in the display together with
the result. If the beep tone is turned on (On 1), the meter also beeps.
You cannot set the hypo indicator if you have turned Acoustic
i
Mode on (On 2). This is to prevent it from being confused with
other beep tones. If you have already set a level, the hypo indica-
tor is automatically turned off if you subsequently turn Acoustic
Mode on.
Settings
3
55