Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
18 VOLT CORDLESS
5-1/2"
CIRCULAR SAW
WITH LASER GUIDE
REV 12c
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 68849
Advertisement
Table of Contents
Related Manuals for Chicago Electric 68849
Summary of Contents for Chicago Electric 68849
- Page 1 Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 68849 18 VOLT CORDLESS 5-1/2"...
-
Page 2: Table Of Contents
Electrical safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-800-444-3353. Item 68849... -
Page 3: Personal Safety
4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Item 68849 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Circular Saw Safety Warnings
The blade washers and Investigate and take corrective actions to bolt were specially designed for your saw, for eliminate the cause of blade binding. optimum performance and safety of operation. Page 4 For technical questions, please call 1-800-444-3353. Item 68849... - Page 5 The saw is not designed for such use and also obstruct vents under the charger. cannot be used safely in that position. Place the charger on a stable, solid, nonflammable surface (such as a stable metal workbench or Item 68849 For technical questions, please call 1-800-444-3353. Page 5...
-
Page 6: Vibration Safety
If you feel any medical or vibration occurs, stop use immediately. physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Page 6 For technical questions, please call 1-800-444-3353. Item 68849... -
Page 7: Extension Cords
WARNING marking concerning WARNING marking concerning Risk Risk of Explosion. of Eye Injury. Wear ANSI-approved Do not puncture, short, or open safety goggles with side shields. battery packs and do not charge damaged battery packs. Item 68849 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Specifications
Pack Red LED: Flashing indicates that the battery is charging. Continuously lit (not flashing) indicates that the battery has finished charging and should be removed from the charger. Green Charger Page 8 For technical questions, please call 1-800-444-3353. Item 68849... - Page 9 Knob (42) Trigger (36) Plate (50) Saw Blade (6) Laser Switch (38) Trigger Lock Button (34) Spindle Lock Button (20) Laser Guide (14) Fence Depth Gauge Adjusting Knob (45) Depth Adjusting Knob (53) Item 68849 For technical questions, please call 1-800-444-3353. Page 9...
- Page 10 5. Place the Outer Flange on the spindle, recessed side first. 6. Hold the Spindle Lock Button (20) while using the Hex Wrench (51) to replace the Blade Bolt (1), turning it clockwise. Page 10 For technical questions, please call 1-800-444-3353. Item 68849...
- Page 11 (not included) to prevent movement while working. whenever cutting pressure treated lumber. 5. Verify that there are no utility lines or hardware in or near the workpiece. This is especially critical for plunge cuts. Item 68849 For technical questions, please call 1-800-444-3353. Page 11...
-
Page 12: General Operating Instructions
Cutting without leveling and/ board or panel to be cut. or proper support will cause the Blade to bind, leading to kickback (see warnings on page 4). Page 12 For technical questions, please call 1-800-444-3353. Item 68849... -
Page 13: Maintenance
NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect Battery Pack and Charger power supply before service. Item 68849 For technical questions, please call 1-800-444-3353. Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 68849... - Page 15 Item 68849 For technical questions, please call 1-800-444-3353. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.