Modem Module - HP Compaq 2510p Maintenance And Service Manual

Modem module

NOTE: All modem module spare part kits include a modem module cable.
Description
For use in all countries and regions except Australia and New Zealand
For use only in Australia and New Zealand
Before removing the modem module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover (see
d. Keyboard (see
e. Display assembly (see
f. Top cover (see
g. System board (see
Remove the modem module:
1. Turn the system board upside down, with the front toward you.
2. Remove the two Phillips PM2.5×4.0 screws (1) that secure the modem module to the system
board.
3. Disconnect the modem module (2) from the system board by lifting it straight up.
78 Chapter 4 Removal and replacement procedures
Battery on page 41).
Hard drive on page 52)
Optical drive on page
Switch cover on page
Keyboard on page 59)
Display assembly on page
Top cover on page 67)
System board on page
56)
57)
62)
70)
Spare part number
443899-001
443899-011