Pc Card Assembly - HP Compaq 2510p Maintenance And Service Manual

PC Card assembly

Description
PC Card assembly
Before removing the PC Card assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover (see
d. Keyboard (see
e. Display assembly (see
f. Top cover (see
g. System board (see
Remove the PC Card assembly:
1. Turn the system board upside down, with the front toward you.
2. Detach the slots on the PC Card assembly (1) from the tabs on the PC Card connector (2).
3. Remove the PC Card assembly (3).
76 Chapter 4 Removal and replacement procedures
Battery on page 41).
Hard drive on page 52)
Optical drive on page
Switch cover on page
Keyboard on page 59)
Display assembly on page
Top cover on page 67)
System board on page
56)
57)
62)
70)
Spare part number
451742-001