Fan/Heat Sink Assembly - HP Compaq 2510p Maintenance And Service Manual

2. Remove the speaker assembly (2) from the base enclosure.
Reverse this procedure to install the speaker assembly.

Fan/heat sink assembly

NOTE: All fan/heat sink assembly spare part kits include thermal material.
Description
Fan/heat sink assembly
Before removing the fan/heat sink assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover (see
d. Keyboard (see
e. Display assembly (see
f. Top cover (see
g. System board (see
74 Chapter 4 Removal and replacement procedures
Battery on page 41).
Hard drive on page 52)
Optical drive on page
Switch cover on page
Keyboard on page 59)
Display assembly on page
Top cover on page 67)
System board on page
56)
57)
62)
70)
Spare part number
451731-001