HP Compaq 2510p Maintenance And Service Manual page 74
Hide thumbs
Also See for Compaq 2510p:
- Setup and configuration manual (18 pages) ,
- White paper (15 pages) ,
- Installation manual (6 pages)
Table of Contents
Advertisement
13.
Remove the display lid switch module (3). The display lid switch module is available using spare
part number 451724-001.
14.
If it is necessary to replace the display bezel or any of the display assembly internal
components, remove the five rubber screw covers (1) and the five Torx T7M2.0×5.0 screws (2)
that secure the display bezel to the display assembly.
15.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the
display bezel until the bezel disengages from the display enclosure.
64
Chapter 4 Removal and replacement procedures
Hide quick links:
Advertisement
Table of Contents
