HP Compaq 2510p Maintenance And Service Manual page 68
Hide thumbs
Also See for Compaq 2510p:
- Setup and configuration manual (18 pages) ,
- White paper (15 pages) ,
- Installation manual (6 pages)
Table of Contents
Advertisement
3.
Release the switch cover by lifting and swinging the hinge cover sections up and forward until
the switch cover rests upside down on the keyboard.
4.
Release the zero insertion force (ZIF) connector (1) to which the LED board cable is attached,
and disconnect the LED board cable (2) from the connector.
5.
Remove the switch cover.
Reverse this procedure to install the switch cover.
58
Chapter 4 Removal and replacement procedures
Hide quick links:
Advertisement
Table of Contents
